Are You Ready To Party??

Setup:

1. Plug the needed periphery items into computer (mouse, zip drive, etc.)
2. Plug the projector into computer using the video cable provided.
3. Plug the projector into a power source.
4. Plug the computer into a power source.
5. Turn on the projector FIRST and wait a few moments for it to warm up.
6. Turn on the computer SECOND.

Troubleshooting:

1. Check that the lens cap is removed from the projector.
2. Check that all cables and plugs are firmly in place.
3. Check that the computer resolution is set to no highter than 1024x768 by going into the control panel, selecting the display icon, clicking the settings tab, and moving the arrow in the screen area section.
4. Check that the computer screen is set to the correct display mode. Do this by looking for a picture of a computer screen amongst the F-keys (usually F3 or F4). Hold down the function key and press the proper F-key once. If the computer image still does not appear through the projector, repeat this step two more times.

If you need more sound than what you’re computer speakers provide, ask about our small and large PA systems that can connect to your computer using its headphone out jack (1/8” output).  

Are You Ready to Party??

4 Sanger Ave. Waterville, ME 04901

207-873-4944

www.areyoureadytoparty.net